99 thoughts on “LivingColors Arduino shields in stock”

  1. @Fillippo : the Gen1 has 4 distinct LEDs on the front, has an oval remote and uses CC2500 and MSP430 chips internally.

    The Gen2 remote is marked Gen2 on the latch underneath.

  2. Hi Ivo

    Do you still have some in stock? How much?

    Have a 1st generation lying around, I want to play with.

  3. Hey Ivo,

    Ziet er leuk uit!
    Verkoop je de shields (kant en klaar of als bouwpakket) nog?
    Ik ben zeker geïnteresseerd!

    Groeten,

    J. Dierkse

  4. Hoi,

    Heb je er nog 1 beschikbaar?
    Leuk om de oude lampen weer nieuw leven te geven.

  5. Hi,

    i am interested in your Shield.
    Are they also available?
    Please contact me, i didn’t found your email-address.

    Greetings from Germany

  6. Hoi,

    Verkoop je deze shields nog steeds? Ik heb nog een oude Livingcolor staan van de eerste generatie die ik graag wil gebruiken als wake-up light.

    Met vriendelijke groet,

    Kevin Worm

  7. Hoi Ivo,
    Ik zou graag mijn livingcolors gen 1, mbv Pilight willen kunnen aansturen, aan-uit is voldoende voor nu. Ik ga er vanuit dat je geen PCB,s meer hebt. Is het mogelijk/gemakkelijk om een bestaande livingcolors afstandsbediending aan te sluiten op de Pi GPIO poort en zo te schakelen?

  8. Hey,
    I’m also interested into having one of these board ? how to proceed, and what’s the cost ? thx

  9. Hello
    I’m also interested into having 2 of these boards ? how to proceed, and what’s the cost ? thx

    regards

  10. Hoi Ivo,

    Ik zou ook heel graag 1 bij je bestellen (als bouwpakket of liefst reeds gemonteerd/getest). Als je ze nog hebt/verkoopt wil je me dan even een mail sturen met details? Alvast heel erg bedankt!

    Jeroen

  11. If it’s not too late, I am interested in a card to integrate lamps “Living Colors” first generation in my Domoticz system.
    How to proceed?
    Thank you

  12. Hi Ivo,

    I see the LivinColors Arduino Shield thread is still alive!
    Do you still have boards in stock?
    I’m interested in taking one of you hands.

    Thanks!

    Kind regards, J.

  13. Hi Ivo,

    Do you still have the LivingColors Arduino Shields in stock?
    I’m interested in using one for my OpenHab project.

    Thanks in advance

    J.

  14. Hello Ivo,

    Do you still have these shields in stock? If so, what would be the price including shipping in the Netherlands?

    Regards,
    Antoine

  15. Hello Ivo,

    Nice stuff going on here. Funny to see there are still a lot of people that want to give their LivingColors first gen a second life. I was wondering if you (still) sell pre assembled Arduino’s with shield?

  16. Hoi Ivo,

    Wat een leuk project 😊 Ik ben ook geïnteresseerd in de kit, ik hoor graag wat de mogelijkheden zijn.

    Bedankt,

    Groeten van Anne

  17. Goedemiddag, ook ik ben geïnteresseerd in dit project, is de kit nog te koop?

  18. Ik zou er ook graag eentje kopen! Een prachtig onderdeel van m’n domotica ecosysteem :)!

  19. Hallo Ivo,

    Heb je voor mij wat meer inhoudelijke details? Wat kost een complete/ kant en klare set en wat heb ik eventueel addioneel nodig om dit werkend te krijgen Domoticz? Ga net pas starten, maar wil wel graag mijn Gen1 (4st) binnen het systeem krijgen.

  20. Hi

    Do you still have a kit in stock?
    If so, please send me a short email.

  21. Hi Ivo,

    same question here, I just discovered your blog (and my good old living colors Gen 1 ;)) and your cool “LivingColors2SmartHome-Gateway”.
    Do you still have a kit available?

    Tom

  22. hello Ivo,
    I recently got two old (hue-bridge incompatible “gen2”) livingcolors and my soldering skills are too weak to solder that mini cc2500 chip on my own. Would be great if you had a kit in stock for me :)
    friendly,
    frostwork

  23. Hi Ivo,
    Many thanks for your investigation, looks promising!
    I have too an old but perfectly working Gen1 LivingColors. I’m moving to Hue. Would your kit help me to connect both?

    Thanks!
    Miguel

  24. Hallo,

    Ik heb twee van dit soort lampen en de afstandsbedieningen zijn allebei gestopt met fatsoenlijk werken. Nu wil ik ze graag toch bedienen en dit shield lijkt me een prima oplossing. Zijn ze nog beschikbaar?

    Gr. Robert Jan

  25. Hello,

    Thanks for your hard work.
    Do you still have some LivingColors Shields ?
    One would be great as I bought a livingColor GEN1 with no remote control.

    Thanks ;)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.